- Out-of-Stock
DJI Aeroscope Stationary Unit
Features:
- Easy to Install
- Detailed Information
- 50 km Max Range
- IP65 Ingress Protection
In the box:
- Aeroscope Processor x 1
- Dongle x 1
- Power Cable x 1
- Processor Mounting Bracket A x 2
- Processor Mounting Bracket B x 2
- Processor GND Cable x 1
- Pin x 5
- Female Power Connector x 1
- RJ45 Connector x 1
- RJ45 Waterproof Case x 1
- Screw Set x 1
- Screw M8 x 100
- Screw Nut M60
- Washer M80
- Screw M6 x 18
Overview
AeroScope is a comprehensive drone detection platform that rapidly identifies UAV communication links, gathering information such as flight status, paths, and other information in real-time. This monitoring data stream helps users make an informed response as soon as possible.
*Drone identification technologies are nascent and may be subject to various laws and regulations that continue to evolve. It is the customer’s responsibility to comply with any applicable laws concerning the use of AeroScope within the jurisdiction(s) of operation.
Stationary Unit
Designed for continuous protection of large-scale sites, the AeroScope stationary unit supports customization and construction according to the specific site and user demands to completely cover the surrounding airspace. Under ideal conditions, the system can monitor a range of up to 50 km and obtain key information from drones in as fast as 2 seconds. Monitoring data can be integrated with users' existing security systems to efficiently provide an integrated monitoring system. This system also supports public cloud, private cloud, and local deployment, capable of meeting specific needs such as off-site monitoring and data segregation.
*Note: The monitoring range of the stationary unit is determined by the type of antennas installed.
Backstage Management System & SDK
The AeroScope Backstage Management System is the core of a comprehensive drone security system. Using advanced information management technology, this system provides central monitoring, command, and investigation tools, integrating with data collected from previous flights. The AeroScope Backstage Management System is a comprehensive and convenient system for enterprises to monitor drones and help make the public airspace safer. It also supports a Software Development Kit (SDK) to meet customers’ specific demands and support the integration of different systems.
Airports
Government Sites
Prisons
Power Plants
Prohibited Military Zones
Secure Locations
| DJI Aeroscope Stationary Unit | |
|---|---|
| Model | AS-F1800 |
| Ingress Protection Rating | IP65 |
| Lightning Rating | IEC61000-4-5 6KV |
| Electromagnetic Compatibility | This equipment meets electromagnetic compatibility requirements and also meets below criteria: Europe: EN 55032: 2015 EN 55024: 2010+A1:2015 EN 61000-3-2: 2014 EN 61000-3-3: 2013 United States: 47 CFR Part 15, Subpart B:2016 |
| Power Consumption | Approx. 70W |
| Input Voltage | Voltage range: 100V AC ~ 240V AC |
| Operating Temperature |
|
| Relative Humidity | 5% RH ~ 100% RH |
| Absolute Humidity | 1 g/m3 ~ 30 g/m3 |
| Atmospheric Pressure | 70 kPa ~ 106 kPa |
| Dimensions | 310 mm(H) × 260 mm (W)× 100 mm (D) |
| Weight | 6.8 kg |
| Support Aircraft |
|
Specific References
New
7 other products in the same category:
Features:
- Easy to Install
- Detailed Information
- 50 km Max Range
- IP65 Ingress Protection
In the box:
- Aeroscope Processor x 1
- Dongle x 1
- Power Cable x 1
- Processor Mounting Bracket A x 2
- Processor Mounting Bracket B x 2
- Processor GND Cable x 1
- Pin x 5
- Female Power Connector x 1
- RJ45 Connector x 1
- RJ45 Waterproof Case x 1
- Screw Set x 1
- Screw M8 x 100
- Screw Nut M60
- Washer M80
- Screw M6 x 18